Home > Knowledge > Content

Features and Working Principle of Chongqing Tongrui Hydraulic Oil Filtration MachinesFeatures and Working Principle of Chongqing Tongrui Hydraulic Oil Filtration Machines

Nov 14, 2026

    Chongqing Tongrui hydraulic oil purification systems are primarily designed for the treatment and regeneration of various high-precision oils-including hydraulic oil, lubricating oil, refrigeration oil, anti-wear hydraulic oil, heat-transfer oil, quenching oil, cleaning oil, and rust-preventive oil-that have fallen below required standards. (For phosphate ester fire-resistant hydraulic fluids, the equipment is constructed entirely from stainless steel.)

 

I. Features of the Hydraulic Oil Purification System

 

    1. It utilizes a high-precision, deep-filtration "DFH" dual-rectangular system that combines multi-layer imported stainless steel mesh with composite polymer adsorption. This system offers exceptional contaminant-holding capacity and superior filtration precision.

 

    2. It incorporates high-intensity magnetic filtration to effectively remove metallic impurities such as iron filings. Imported polymer materials are used to achieve complete demulsification, while a combination of coalescence-separation and vacuum-based, three-dimensional "flash evaporation" ensures rapid and thorough removal of water and gases.

 

    3. The system employs an advanced, multi-U-shaped, gradient-density carbon-fiber-cellulose far-infrared heating element, which provides efficient, uniform heating while conserving energy. The filtration process is purely physical, ensuring the fundamental properties of the oil and its additives remain intact. Additionally, a forced-air cooling system facilitates the rapid condensation and precipitation of water vapor, thereby protecting the vacuum pump.

 

    4. An infrared liquid-level controller automates the regulation of oil inflow and outflow, ensuring a balanced flow rate.

 

The story of transformer oil's rejuvenation: Don't throw it away! Tongrui is calling for you to recycle it!

 

II. Operating Principle of the Hydraulic Oil Purification System

 

    1. During operation, contaminated oil is drawn into the system by atmospheric pressure and enters the heater. Once heated, the oil passes through a primary filter, where large particulate impurities are removed. The oil then flows into a water-separation unit and a vacuum separator, passing through a specialized dispersion device. This device significantly increases the surface area of ​​the oil, exposing it to a low-humidity vacuum environment, which effectively removes water, air, and other dissolved gases. The resulting mixture of water vapor and gases is condensed into liquid form via a condenser and collected in a water-storage tank, while any remaining non-condensable gases are exhausted by the vacuum pump. Once the water has been removed, the oil is pumped into a fine filter to eliminate particulate impurities, resulting in purified oil. This completes one purification cycle; depending on the initial water content, multiple cycles may be required to remove the moisture completely.

 

III. Contact Information
Kunlun Lee: +8618996204170 (WhatsApp, WeChat)
                    export@cqtongrui.com
Address: 55-2 Longding Enterprise Center, Tongtao North Road, Jiulongpo District, Chongqing, China

Send Inquiry
Contact Us
  • Tel: +86-189 9620 4170
  • Email: export@cqtongrui.com
  • Add: No.1-2, Building 55, No.118, Tongtao North Road, Jiulongpo District, Chongqing, China