Technological innovation is the source of our business development. The company's R&D center meets the needs of consumers for scientific and technological goals, continues to attract professional and technical personnel at home and abroad, increases scientific research equipment, accelerates the development of Portable Oil Filtration, Oil Filter Cleaning Machine, Vacuum Oil Filter new products, and makes it more in line with the needs of market competition in the new century. Innovation is our unremitting pursuit, quality assurance is our eternal concept, customer satisfaction is our greatest wish. We always pursue the good quality of products. With our strong manufacturing technology and scientific and innovative management platform, we closely follow the trend of industry development and continuously launch more environmentally friendly, energy-saving and humanized high-quality products. Responsibility to customers, to yourself, to employees, to the company, and to society are the basic principles that all our employees abide by. We believe that as long as a person is suitable for his or her job, and the job is suitable for the person, and the person can play a person's ability in the position of the enterprise, this person is a talent.
Basic information
ZJR is double stage high vacuum transformer oil purifier machine, which contain vacuum pump and roots pump. We can do more big capacity of machine, and the smallest one is ZJR-30, 1800L/H, The biggest one is more than 30,000L/H. The machine is adopted the rustproof and moisture film and wood cases packages. We can take special order for you, like the machine face, color, weight, size, filter precision, filter numbers, spare parts, oil specification tester, etc.
Principle of work：
During high vacuum transformer oil purifier machine working, oil remove impurities by highly efficient specific filter. It use special personalized vacuum separator and its "layered filtration" high-precision filtering technologies, and use the "cavitations’" principle, and then the contact area of the oil in vacuum separator expanded a few hundred times than before. The "cavitations’" system let surface area of the oil evaporation become greater, and the Evaporation interface Update continuously so that increased volatilization of water and the regeneration of the oil in vacuum system by the greatest extent. The moisture can be quickly removed under the condition of the low temperature/ high vacuum/ large surface and at high pumping speed. Finally it been excreted from vacuum system.
The oil is removed color by the decoloration regeneration system. After that, the oil to fine filtration the net oil will flow from the oil outlet and complete the whole process of filtration.
Technical parameters
Index | Unit | ZJR |
Flow capacity | L/H | 1800~18,000 |
Working vacuum | MPa | -0.092～-0.099 |
Working pressure | MPa | ≤0.3 |
highest attained vacuum | Pa | ≤50 |
Temperature range | ℃ | 45～80 |
Oil breakdown voltage | kv | ≥75 |
Impurities content | um | ≤3 No free carbon |
Dielectric loss | tgδ | ≤0.005 |
Interfacial tension | mN／m | ≥40 |
Water content | PPM | ≤5 |
Gas content | ％ | ≤0.1 |
Operating noise | dB(A) | ≤75 |
Operation Precautions
1. When the vacuum pump is working, pay attention to the oil condition displayed by the oil mark (the oil should be on the oil mark line). When the vacuum pump has a lot of oil and water, it should be replaced in time.
2. When it is found that there is a lot of water in the cooler during operation, it should be drained in time.
3. Always pay attention to the change of the pressure gauge value. When the pressure is greater than 0.3Mpa, the filter should be cleaned or the filter element should be replaced.
4. The filter screen of the primary filter and the secondary filter should be removed and cleaned frequently to keep it clean to avoid clogging, resulting in insufficient oil intake or excessive pressure.
5. Pay attention to whether the running noise of the pump and the corresponding motor is normal at any time during operation. If it is abnormal, it should be eliminated immediately.
6. When the machine is not in use, the residual oil in the oil machine should be drained out for use.
We are a professional manufacturer for 3000L/H High Vacuum Oil Filtration Machine, Transformer Oil Purifier, Insulating Oil Filtration Machine, with a complete and scientific quality management system. Our products have fast delivery, stable and reliable quality and in place after-sales service, which are deeply trusted and praised by our customers. Through modern management philosophy, all our employees can display their creative enthusiasm, and push the company to a continuous and rapid development track.
Hot Tags: high vacuum transformer oil purifier machine, China, suppliers, manufacturers, customized, wholesale, price, Portable Transformer Oil Filtration Machine, Waste Engine Oil Recycling Machine, Transformer Oil Purifier Machine, Oil Purification Machine, Hydraulic Oil Purifier Machine, Waste Lube Oil Recovery To Yellow Oil Machine
