Our company is constantly introducing new Used Hydraulic Oil Filtration System, Transformer Oil Processing Equipment, Filtration Of Insulating Oil in the hope of attracting more customers. In many years of production practice, we have always insisted on management and technological innovation, and we can provide customers with the best solutions and best quality services. We look forward to the joining and cooperation of people with lofty ideals from all walks of life, and work together to create a better tomorrow. The company insists on survival by quality, development by innovation, and strives to create a new glory for the company in the future. We establish good cooperative relationship with customers, collect and feedback customer information, so as to be closer to the market and consumers.
Vacuum Type steam turbine lube oil filter mainly designed to purify various industrial waste oils with the viscosity lower than 320 mm²/s, such as tirbine oil, mechanical oil, hydraulic oil and cooler oil etc. which are polluted by the water infiltration, emulsification and particle pollution etc. in the process of their production, transportation and usage.
Through special design of the vacuum separation system and the impurity filtering system, Tongrui oil purifiers can effectively filter out various pollutants in the oil.
Vacuum Type steam turbine lube oil filter t has remarkable economic benefits, it will be an ideal choice for the plants maintenance service, energy-saving and cost-reducing.
The special design and mature technology can promise its after-treatment oil index:
Water content: ≤50ppm
Filtration accuracy: 3 micron
Particles: no (by visual test)
Specifications:
Parameter：Item | Unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 |
Vacuum degree | Mpa | -0.06 ～ -0.096 | |||||||
Working pressure | Mpa | ≤0.3 | |||||||
Fault free | H | ≥4000 | |||||||
Continuous working time | H | ≥150 | |||||||
Working temperature | ℃ | 40 ～ 70 | |||||||
Heating power | kW | 15 | 18 | 30 | 45 | 60 | 72 | 72 | 84 |
Total Power | kW | 17 | 20 | 33 | 49 | 66 | 79 | 81 | 97 |
Diameter of inlet &outlet | DN | 25 | 25 | 25 | 32 | 42 | 42 | 50 | 50 |
weight | Kg | 500 | 530 | 570 | 780 | 800 | 960 | 1050 | 1550 |
Dimension (mm) | L | 1300 | 1350 | 1450 | 1500 | 1500 | 1800 | 1800 | 1800 |
W | 1000 | 1000 | 1100 | 1150 | 1000 | 1500 | 1650 | 1500 | |
H | 1450 | 1450 | 1500 | 1650 | 1750 | 1800 | 1900 | 2000 | |
Oil index after treatment | |||||||||
Water content | 80ppm | ||||||||
Gas content | ≤0.1% | ||||||||
cleanness | ≤5µm（or as per requirement） | ||||||||
Demulsification Value | ≤10 min | ||||||||
◆Spare Parts
1.filtration system
The steam turbine lube oil filter
machine uses a multi-stage filtration system, pre-filter is stainless steel which can be used by repeatedly washed and the fine filter is import material.
2. Heating system
Heating system consists of heater, temperature controller and other components . Multiple sets of heaters can be used alone, can also be put into use at the same time. The start for heater is controlled by the temperature set on the temperature controller.Temperature control device must be started under the running of vacuum pump and oil pump. Therefore, in the three interlocking, not only ensure the safe operation of the heater, but also prevent from producing “dead” oil zone and the oil aging, at the same time it can monitoring the heating system and control the heater works within a set temperature range. When the heater temperature exceeds the set point, the machine can be automatically stop the heater running to ensure the safety of the machine, oil and personnel.
3.Vacuum system
Vacuum system consists of a vacuum separator, vacuum pumps, condensers, coolers and other components. Using the " cavitation " principle, the contact area of the oil expands hundreds times of the original in the vacuum separator, while the "cavitation" system and the evaporation surface area of the oil is increasing, and evaporated interface constantly updated to maximize the travel of the oil in the vacuum system and static water evaporation area.
4.automatic control system and protecting system
Automatic control system consists of infrared sensors, motors , solenoid valves, protection components and other components.
5.cooling system
It is consist of heat exchanger, cooler, radiator, water reservoir and other components. The water vapour and other gas which produced from vacuum separator, it changes into water after passing through the heat exchanger into the cooler, the radiator and is collected into water. The drying gas is discharged by vacuum pump, thereby it can protecting the vacuum pump.
Steam turbine lube oil filter pictures:
We adhere to the concept of 'service as the core' to tailor valuable Coalescence and Separation Online Steam Turbine Oil Filtration System for Low Viscosity Lube Oil for customers. We have always pursued the business tenet of growth in competition, surpass in innovation. As long as you cooperate with us, you will surely enjoy our high-quality, cost-effective products and services. We are in line with the people-oriented, integration, win-win, scientific and technological innovation concept to provide customers with quality products.
Hot Tags: steam turbine lube oil filter, China, suppliers, manufacturers, customized, wholesale, price, Heavy Fuel Oil Purifier, Oil Purifier Machine, Portable Oil Filtration Systems, High Efficient Hydraulic Oil Filters, Transformer Filter Machine, High Vacuum Transformer Oil Purifier Machine
