Double Stage High Vacuum Insulating Transformer Insulation Oil Purifier Machine for Lube and Hydraulic Oil

Double Stage High Vacuum Insulating Transformer Insulation Oil Purifier Machine for Lube and Hydraulic Oil

ZJR is double stage high vacuum transformer oil purifier machine, which contain vacuum pump and roots pump. We can do more big capacity of machine, and the smallest one is ZJR-30, 1800L/H, The biggest one is more than 30,000L/H. The machine is adopted the rustproof and moisture film and wood cases packages.
Send Inquiry
Description

We always insist on pushing out new Oil-Water Separator, Oil Filter Cleaning Machine, Engine Oil Recycling Machine with our innovative and perfect product quality, which is our consistent attitude. We strive to enhance our own strength, hoping to increase the company's control and influence in the industry involved. In the increasingly competitive market, only those products with bright ideas, artistic characteristics and finally selling points in the market will be recognized by consumers. We have always been recognized by the industry with our high-end quality products and professional technical support. We sincerely hope to cooperate with all walks of life, and welcome people with insight to join our team and ride the waves on the road of enterprise development.

Basic information

ZJR is double stage high vacuum transformer oil purifier machine, which contain vacuum pump and roots pump. We can do more big capacity of machine, and the smallest one is ZJR-30, 1800L/H, The biggest one is more than 30,000L/H. The machine is adopted the rustproof and moisture film and wood cases packages. We can take special order for you, like the machine face, color, weight, size, filter precision, filter numbers, spare parts, oil specification tester, etc.


transformer oil purification system function


Principle of work

During high vacuum transformer oil purifier machine working, oil remove impurities by highly efficient specific filter. It use special personalized vacuum separator and its "layered filtration" high-precision filtering technologies, and use the "cavitations’" principle, and then the contact area of the oil in vacuum separator expanded a few hundred times than before. The "cavitations’" system let surface area of the oil evaporation become greater, and the Evaporation interface Update continuously so that increased volatilization of water and the regeneration of the oil in vacuum system by the greatest extent. The moisture can be quickly removed under the condition of the low temperature/ high vacuum/ large surface and at high pumping speed. Finally it been excreted from vacuum system.

The oil is removed color by the decoloration regeneration system. After that, the oil to fine filtration the net oil will flow from the oil outlet and complete the whole process of filtration.

centrifugal oil purifier testing


Technical parameters

Index

Unit

ZJR

Flow capacity

L/H

1800~18,000

Working vacuum

MPa

-0.092~-0.099

Working pressure

MPa

≤0.3

highest attained vacuum

Pa

≤50

Temperature range

45~80

Oil breakdown voltage

kv

≥75

Impurities content

um

≤3 No free carbon

Dielectric loss

tgδ

≤0.005

Interfacial tension

mN/m

≥40

Water content

PPM

≤5

Gas content

≤0.1

Operating noise

dB(A)

≤75


Operation Precautions

1. When the vacuum pump is working, pay attention to the oil condition displayed by the oil mark (the oil should be on the oil mark line). When the vacuum pump has a lot of oil and water, it should be replaced in time.

2. When it is found that there is a lot of water in the cooler during operation, it should be drained in time.

3. Always pay attention to the change of the pressure gauge value. When the pressure is greater than 0.3Mpa, the filter should be cleaned or the filter element should be replaced.

4. The filter screen of the primary filter and the secondary filter should be removed and cleaned frequently to keep it clean to avoid clogging, resulting in insufficient oil intake or excessive pressure.

5. Pay attention to whether the running noise of the pump and the corresponding motor is normal at any time during operation. If it is abnormal, it should be eliminated immediately.

6. When the machine is not in use, the residual oil in the oil machine should be drained out for use.


Through continuous innovation, we have completed the development layout in the field of manufacturing the Double Stage High Vacuum Insulating Transformer Insulation Oil Purifier Machine for Lube and Hydraulic Oil. Our company continuously absorbs and draws lessons from the world's advanced concepts and management methods, and strives to realize the integration of enterprise management with international standards. We will always keep in mind the original intention and mission of "creating value for customers, profit for shareholders, and happiness for employees, and continuously promoting the reform and development of the enterprise".

Hot Tags: high vacuum transformer oil purifier machine, China, suppliers, manufacturers, customized, wholesale, price, Transformer Oil Treatment Machine, Hydraulic Oil Purifier Machine, Transformer Filtration Machine, Waste Lube Oil Recovery To Yellow Oil Machine, Used Engine Oil Refining Machine, Used Engine Oil Recycling Machine

Send Inquiry