Our science and technology management team is composed of modern enterprise management experience in the Used Oil Recycling Machine For Sale, Fuel Oil Purifier System, Waste Lube Oil Recovery To Yellow Oil Machine industry and technical professionals, working efficiently, relying on strong technical resources, professional management and perfect supply and sales channels. Because people's needs often change and improve, enterprises can adapt to the changing needs of consumers only by continuously improving products, increasing features and functions, improving product quality and improving appearance, packaging and decoration. Our company develops rapidly, pays great attention to product quality, and establishes a production and management philosophy centered on quality and reputation. Our talent concept is, moderate ability, integrate into the team, dare to innovate. As a company with global operations, we are always concerned about environmental protection in the places where we operate.
Vacuum Type steam turbine lube oil filter mainly designed to purify various industrial waste oils with the viscosity lower than 320 mm²/s, such as tirbine oil, mechanical oil, hydraulic oil and cooler oil etc. which are polluted by the water infiltration, emulsification and particle pollution etc. in the process of their production, transportation and usage.
Through special design of the vacuum separation system and the impurity filtering system, Tongrui oil purifiers can effectively filter out various pollutants in the oil.
Vacuum Type steam turbine lube oil filter t has remarkable economic benefits, it will be an ideal choice for the plants maintenance service, energy-saving and cost-reducing.
The special design and mature technology can promise its after-treatment oil index:
Water content: ≤50ppm
Filtration accuracy: 3 micron
Particles: no (by visual test)
Specifications:
Parameter：Item | Unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 |
Vacuum degree | Mpa | -0.06 ～ -0.096 | |||||||
Working pressure | Mpa | ≤0.3 | |||||||
Fault free | H | ≥4000 | |||||||
Continuous working time | H | ≥150 | |||||||
Working temperature | ℃ | 40 ～ 70 | |||||||
Heating power | kW | 15 | 18 | 30 | 45 | 60 | 72 | 72 | 84 |
Total Power | kW | 17 | 20 | 33 | 49 | 66 | 79 | 81 | 97 |
Diameter of inlet &outlet | DN | 25 | 25 | 25 | 32 | 42 | 42 | 50 | 50 |
weight | Kg | 500 | 530 | 570 | 780 | 800 | 960 | 1050 | 1550 |
Dimension (mm) | L | 1300 | 1350 | 1450 | 1500 | 1500 | 1800 | 1800 | 1800 |
W | 1000 | 1000 | 1100 | 1150 | 1000 | 1500 | 1650 | 1500 | |
H | 1450 | 1450 | 1500 | 1650 | 1750 | 1800 | 1900 | 2000 | |
Oil index after treatment | |||||||||
Water content | 80ppm | ||||||||
Gas content | ≤0.1% | ||||||||
cleanness | ≤5µm（or as per requirement） | ||||||||
Demulsification Value | ≤10 min | ||||||||
◆Spare Parts
1.filtration system
The steam turbine lube oil filter
machine uses a multi-stage filtration system, pre-filter is stainless steel which can be used by repeatedly washed and the fine filter is import material.
2. Heating system
Heating system consists of heater, temperature controller and other components . Multiple sets of heaters can be used alone, can also be put into use at the same time. The start for heater is controlled by the temperature set on the temperature controller.Temperature control device must be started under the running of vacuum pump and oil pump. Therefore, in the three interlocking, not only ensure the safe operation of the heater, but also prevent from producing “dead” oil zone and the oil aging, at the same time it can monitoring the heating system and control the heater works within a set temperature range. When the heater temperature exceeds the set point, the machine can be automatically stop the heater running to ensure the safety of the machine, oil and personnel.
3.Vacuum system
Vacuum system consists of a vacuum separator, vacuum pumps, condensers, coolers and other components. Using the " cavitation " principle, the contact area of the oil expands hundreds times of the original in the vacuum separator, while the "cavitation" system and the evaporation surface area of the oil is increasing, and evaporated interface constantly updated to maximize the travel of the oil in the vacuum system and static water evaporation area.
4.automatic control system and protecting system
Automatic control system consists of infrared sensors, motors , solenoid valves, protection components and other components.
5.cooling system
It is consist of heat exchanger, cooler, radiator, water reservoir and other components. The water vapour and other gas which produced from vacuum separator, it changes into water after passing through the heat exchanger into the cooler, the radiator and is collected into water. The drying gas is discharged by vacuum pump, thereby it can protecting the vacuum pump.
Steam turbine lube oil filter pictures:
Our Fuootech Vacuum Turbine Oil Purifier 6000 Liters/Hour have been widely recognized by customers as soon as they come out, and our market share has increased rapidly. Combined with the new situation and new tasks we are currently facing, we have accelerated our structural adjustment and put forward the goal of becoming an influential and competitive enterprise in the industry. Research and development is for the innovation and progress of technology, for the more competitive ability of the company and products, is the important foundation for the company to achieve rapid growth, so the company always pay attention to technology research and development.
Hot Tags: steam turbine lube oil filter, China, suppliers, manufacturers, customized, wholesale, price, High Efficient Transformer Oil Purifier, High Vacuum Turbine Oil Purifier, Hydraulic Oil Purifier Machine, Transformer Oil Filtration Plant, Heavy Fuel Oil Purifier, Transformer Oil Filtering Machine
