We are advancing courageously along the road of 'groupization, industrialization, specialization, and internationalization' and continue to contribute to the Portable Hydraulic Oil Cleaning, Portable Oil Filter Machine, High Vacuum Transformer Oil Purifier Machine industry all over the world. The company has laid a solid foundation for the company in the fiercely competitive market by virtue of its skilled craftsmanship and the pursuit of high-quality careers. We take a professional attitude, pay attention to the needs of the market, continue to innovate, work closely with partners, and listen to users. We have won wide acclaim from the market, our sales performance has been increasing year by year, and our product range and service quality have also been improved day by day. The company attaches great importance to innovation, and persevere, dare to practice, and be diligent in practice.
Vacuum Type steam turbine lube oil filter mainly designed to purify various industrial waste oils with the viscosity lower than 320 mm²/s, such as tirbine oil, mechanical oil, hydraulic oil and cooler oil etc. which are polluted by the water infiltration, emulsification and particle pollution etc. in the process of their production, transportation and usage.
Through special design of the vacuum separation system and the impurity filtering system, Tongrui oil purifiers can effectively filter out various pollutants in the oil.
Vacuum Type steam turbine lube oil filter t has remarkable economic benefits, it will be an ideal choice for the plants maintenance service, energy-saving and cost-reducing.
The special design and mature technology can promise its after-treatment oil index:
Water content: ≤50ppm
Filtration accuracy: 3 micron
Particles: no (by visual test)
Specifications:
Parameter：Item | Unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 |
Vacuum degree | Mpa | -0.06 ～ -0.096 | |||||||
Working pressure | Mpa | ≤0.3 | |||||||
Fault free | H | ≥4000 | |||||||
Continuous working time | H | ≥150 | |||||||
Working temperature | ℃ | 40 ～ 70 | |||||||
Heating power | kW | 15 | 18 | 30 | 45 | 60 | 72 | 72 | 84 |
Total Power | kW | 17 | 20 | 33 | 49 | 66 | 79 | 81 | 97 |
Diameter of inlet &outlet | DN | 25 | 25 | 25 | 32 | 42 | 42 | 50 | 50 |
weight | Kg | 500 | 530 | 570 | 780 | 800 | 960 | 1050 | 1550 |
Dimension (mm) | L | 1300 | 1350 | 1450 | 1500 | 1500 | 1800 | 1800 | 1800 |
W | 1000 | 1000 | 1100 | 1150 | 1000 | 1500 | 1650 | 1500 | |
H | 1450 | 1450 | 1500 | 1650 | 1750 | 1800 | 1900 | 2000 | |
Oil index after treatment | |||||||||
Water content | 80ppm | ||||||||
Gas content | ≤0.1% | ||||||||
cleanness | ≤5µm（or as per requirement） | ||||||||
Demulsification Value | ≤10 min | ||||||||
◆Spare Parts
1.filtration system
The steam turbine lube oil filter
machine uses a multi-stage filtration system, pre-filter is stainless steel which can be used by repeatedly washed and the fine filter is import material.
2. Heating system
Heating system consists of heater, temperature controller and other components . Multiple sets of heaters can be used alone, can also be put into use at the same time. The start for heater is controlled by the temperature set on the temperature controller.Temperature control device must be started under the running of vacuum pump and oil pump. Therefore, in the three interlocking, not only ensure the safe operation of the heater, but also prevent from producing “dead” oil zone and the oil aging, at the same time it can monitoring the heating system and control the heater works within a set temperature range. When the heater temperature exceeds the set point, the machine can be automatically stop the heater running to ensure the safety of the machine, oil and personnel.
3.Vacuum system
Vacuum system consists of a vacuum separator, vacuum pumps, condensers, coolers and other components. Using the " cavitation " principle, the contact area of the oil expands hundreds times of the original in the vacuum separator, while the "cavitation" system and the evaporation surface area of the oil is increasing, and evaporated interface constantly updated to maximize the travel of the oil in the vacuum system and static water evaporation area.
4.automatic control system and protecting system
Automatic control system consists of infrared sensors, motors , solenoid valves, protection components and other components.
5.cooling system
It is consist of heat exchanger, cooler, radiator, water reservoir and other components. The water vapour and other gas which produced from vacuum separator, it changes into water after passing through the heat exchanger into the cooler, the radiator and is collected into water. The drying gas is discharged by vacuum pump, thereby it can protecting the vacuum pump.
Steam turbine lube oil filter pictures:
The concept of quality is the life of the enterprise is our motivation to continuously improve Oil Filter Unit for Oil Recycling at Steam Turbine Water Turbine and Generator Bearing quality and pursue perfect quality. We will always adhere to the concept of soundness and balance the relationship between development, risk and profitability. The company has established long-term good trust with tens of thousands of customers and won praises with its excellent products and high-quality services.
Hot Tags: steam turbine lube oil filter, China, suppliers, manufacturers, customized, wholesale, price, Vacuum Oil Filter Machine, Turbine Oil Filtration Machine, Fuel Oil Purifier System, Transformer Oil Regeneration Machine, Waste Oil Recycling Machine, Turbine Oil Filter Machine
