We've been commitment to offer the competitive rate, outstanding merchandise good quality, too as fast delivery for Steam Turbine Lube Oil Filter, Waste Engine Oil Recycling Machine, Fuel Oil Purification. Our company has international advanced production and testing equipment and professional technical personnel to ensure product quality and continuous innovation. While using the improvement of society and economy, our corporation will retain a tenet of 'Focus on trust, high quality the first', moreover, we count on to make a glorious long run with each and every customer.
Application scenarios
This centrifugal oil cleaning machine is mainly used for turbine oil treatment, which can quickly and effectively remove moisture, gas and impurities in the oil. Improve the oil quality, ensure the normal operation of the unit adjustment and lubrication system, and prolong the maintenance period of the unit.
Product advantages：
1. Strong ability to remove water and break emulsification, it is easy to separate a large amount of water in the oil, and it is also easy to remove a small amount of water in the oil. The oil becomes clear and transparent.
2. The ability to filter impurities is strong. The automatic backwashing filter bag can remove a large amount of impurities in the oil. The large area and deep precision filter material can remove the fine particles in the oil. It can be used instead of the oil system cleaning device to make the oil with serious pollution. The system can also be restored to within the "Operating Turbine Oil Pollution Control Standards".
3. High degree of automation, small and light, safe and reliable. This machine adopts infrared liquid level automatic control device, which realizes the separation of man-machine and makes the operation simpler and more reliable.
Main performance:
Centrifugal oil cleaning machine can be used to treat oil with water content of about 30%, serious emulsification, and pollution degree of NAS1636 grade 15. After the circulating purification treatment of this machine, it can reach:
Appearance: No impurities, transparent, no free water
Residual moisture is less than 50ppm
Filtration accuracy is less than 5 microns
Cleanliness NAS1638, level 5
Technical Parameter
Item | unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 | ZJC-300 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 | 18000 |
Vacuum degree | Mpa | -0.06 ～ -0.096 | ||||||||
Working pressure | Mpa | ≤0.3 | ||||||||
Fault free | H | ≥4000 | ||||||||
Continuous working time | H | ≥150 | ||||||||
Working temperature | ℃ | 40 ～ 70 | ||||||||
Heating power | kW | 9 | 18 | 30 | 36 | 60 | 72 | 108 | 144 | 144 |
Total Power | kW | 11.5 | 17.5 | 33 | 39.5 | 66 | 79 | 115 | 153.5 | 154 |
Oil index after treatment | ||||||||||
Water content | 80ppm | |||||||||
Gas content | ≤0.1% | |||||||||
cleanness | ≤5µm（or as per requirement） | |||||||||
Demulsification Value | ≤10 min | |||||||||
Instructions for use
Operation Precautions When the vacuum pump is working, pay attention to the oil condition displayed by the oil mark of the vacuum pump (the oil should be on the oil mark line). If it is found that there is too much water in the vacuum pump oil or it is too dirty, it should be replaced in time to avoid affecting the use of the vacuum pump. life. (1# vacuum pump oil) When it is found that there is a lot of water in the cooler during operation, it should be released in time. Always pay attention to the change of the pressure gauge value. During the normal oil filtering process, if the pressure is found to be >0.3Mpa, the filter should be cleaned or the filter element should be replaced in time.
We strive to improve the technological content and added value of our Self Cleaning Disc Centrifugal Milk Cream Separator and turn our comparative advantage based on resources into a competitive advantage based on technological progress. Our employees are more willing to accept challenging jobs. It may be more important for them to give full play to their professional expertise and achieve career success than material rewards. Through sustained and steady development, we will achieve the strategic goal of building us into an innovative, service-oriented, and integrated brand enterprise group!
Hot Tags: centrifugal oil cleaning machine, China, suppliers, manufacturers, customized, wholesale, price, Portable Hydraulic Oil Cleaning Machine, Vacuum Dehydration Oil Purification System, Used Oil Recycling Machine For Sale, Engine Oil Purification Machine, Automatic Oil Water Separation Equipment, Transformer Oil Filtration Unit
