We have established a good reputation in Oil Filter Cleaning Machine, Fuel Oil Purifier in Ship, Waste Hydraulic Oil Cleaning Machine industry and promoted the re-establishment of quality services for market competition. We always believe that customer satisfaction and recognition is an important yardstick to measure our work performance. Our company adheres to the tenet of 'honesty wins the world, quality wins the hearts of the people', constantly develops and innovates, always adheres to the concept of scientific management, honesty and customer satisfaction, constantly improves the quality of products and services, and sincerely serves our customers. We are committed to developing new technologies, new business models and new modes, and promoting major strategic opportunities for industrial diversification. Strong technical support and development capabilities, so that we can adapt to the rapid development of the times, continuous independent innovation.
Vacuum Type steam turbine lube oil filter mainly designed to purify various industrial waste oils with the viscosity lower than 320 mm²/s, such as tirbine oil, mechanical oil, hydraulic oil and cooler oil etc. which are polluted by the water infiltration, emulsification and particle pollution etc. in the process of their production, transportation and usage.
Through special design of the vacuum separation system and the impurity filtering system, Tongrui oil purifiers can effectively filter out various pollutants in the oil.
Vacuum Type steam turbine lube oil filter t has remarkable economic benefits, it will be an ideal choice for the plants maintenance service, energy-saving and cost-reducing.
The special design and mature technology can promise its after-treatment oil index:
Water content: ≤50ppm
Filtration accuracy: 3 micron
Particles: no (by visual test)
Specifications:
Parameter：Item | Unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 |
Vacuum degree | Mpa | -0.06 ～ -0.096 | |||||||
Working pressure | Mpa | ≤0.3 | |||||||
Fault free | H | ≥4000 | |||||||
Continuous working time | H | ≥150 | |||||||
Working temperature | ℃ | 40 ～ 70 | |||||||
Heating power | kW | 15 | 18 | 30 | 45 | 60 | 72 | 72 | 84 |
Total Power | kW | 17 | 20 | 33 | 49 | 66 | 79 | 81 | 97 |
Diameter of inlet &outlet | DN | 25 | 25 | 25 | 32 | 42 | 42 | 50 | 50 |
weight | Kg | 500 | 530 | 570 | 780 | 800 | 960 | 1050 | 1550 |
Dimension (mm) | L | 1300 | 1350 | 1450 | 1500 | 1500 | 1800 | 1800 | 1800 |
W | 1000 | 1000 | 1100 | 1150 | 1000 | 1500 | 1650 | 1500 | |
H | 1450 | 1450 | 1500 | 1650 | 1750 | 1800 | 1900 | 2000 | |
Oil index after treatment | |||||||||
Water content | 80ppm | ||||||||
Gas content | ≤0.1% | ||||||||
cleanness | ≤5µm（or as per requirement） | ||||||||
Demulsification Value | ≤10 min | ||||||||
◆Spare Parts
1.filtration system
The steam turbine lube oil filter
machine uses a multi-stage filtration system, pre-filter is stainless steel which can be used by repeatedly washed and the fine filter is import material.
2. Heating system
Heating system consists of heater, temperature controller and other components . Multiple sets of heaters can be used alone, can also be put into use at the same time. The start for heater is controlled by the temperature set on the temperature controller.Temperature control device must be started under the running of vacuum pump and oil pump. Therefore, in the three interlocking, not only ensure the safe operation of the heater, but also prevent from producing “dead” oil zone and the oil aging, at the same time it can monitoring the heating system and control the heater works within a set temperature range. When the heater temperature exceeds the set point, the machine can be automatically stop the heater running to ensure the safety of the machine, oil and personnel.
3.Vacuum system
Vacuum system consists of a vacuum separator, vacuum pumps, condensers, coolers and other components. Using the " cavitation " principle, the contact area of the oil expands hundreds times of the original in the vacuum separator, while the "cavitation" system and the evaporation surface area of the oil is increasing, and evaporated interface constantly updated to maximize the travel of the oil in the vacuum system and static water evaporation area.
4.automatic control system and protecting system
Automatic control system consists of infrared sensors, motors , solenoid valves, protection components and other components.
5.cooling system
It is consist of heat exchanger, cooler, radiator, water reservoir and other components. The water vapour and other gas which produced from vacuum separator, it changes into water after passing through the heat exchanger into the cooler, the radiator and is collected into water. The drying gas is discharged by vacuum pump, thereby it can protecting the vacuum pump.
Steam turbine lube oil filter pictures:
We have established a good long-term cooperative relationship and formed a good reputation in the Turbine Oil Waste Oil Filtration Recycled Turbine Oil Purifier Machine industry. We combine management energy saving and technical energy saving, improve energy management system and implement green operation. We take 'quality first, customer first' as our business tenet, and use high-quality products and good after-sales service as a strong backing for your business development. We warmly welcome new and old customers to our factory to discuss cooperation and seek common development.
Hot Tags: steam turbine lube oil filter, China, suppliers, manufacturers, customized, wholesale, price, Centrifugal Lube Oil Purifier, Turbine Oil Purifier, Portable Hydraulic Oil Cleaning, Transformer Filtration Systems, Hydraulic Oil Recycling Machine, Hydraulic Oil Water Separator
