Home > Knowledge > Content

Introduction to the principle of vacuum oil filter

Feb 09, 2023

Vacuum oil filter is designed according to the boiling points of water and oil. It is composed of vacuum heating tank, fine filter, primary filter, vacuum pump, oil discharge pump and electrical cabinet.

 

The vacuum pump pumps out the air in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the external oil enters the primary filter through the inlet pipe to remove larger particles; then enters the heating tank, and the oil heated to the specified temperature enters the vacuum tank. , the water in the oil quickly evaporates into water vapor and is continuously sucked into the oil-water separator by the vacuum pump: the water vapor in the separator is reduced to water after cooling and then released. The oil in the vacuum heating tank is discharged into the filter by the oil discharge pump to filter out the particulate impurities through the filter element. In this way, the whole process of vacuum filtration to quickly remove impurities, water, and gas in the oil is completed, and the clean oil is discharged from the outlet.

 

Technical standard - strong ability to remove moisture and demulsify

The vacuum oil filter generally adopts the coalescence separation technology, and the special demulsification device (water separator) can not only quickly and easily separate a large amount of water in the oil, but also facilitate the removal of trace water in the oil, and can make the turbid emulsified oil become turbid and emulsified. Clear and transparent.

 

Strong ability to filter out impurities, and has automatic recoil function

Under normal circumstances, the vacuum oil filter uses a multi-stage cartridge filter, which has a strong ability to filter out impurities. The coarse filter adopts a large-flow washable filter element, which has high filtration efficiency and can remove a large amount of impurities in the oil; Fine particles in the oil; so that the heavily polluted turbine oil can also be restored to within the "Control Standard for Turbine Oil Pollution Degree". The whole machine is designed with an automatic backwash function, which not only improves the continuous working time of the equipment, but also ensures the service life of the filter element.

Send Inquiry
Contact Us
  • Tel: +86-189 9620 4170
  • Email: export@cqtongrui.com
  • Add: No.1-2, Building 55, No.118, Tongtao North Road, Jiulongpo District, Chongqing, China