The transformer oil reuse oil filter is a device used to treat and purify transformer oil. It extends the life of transformer oil and improves the reliability of electrical equipment by removing impurities, moisture and gases.
First of all, an oil purifier usually consists of a filtration system, a heating system and a control system. Filtration systems use specially designed filters or membranes to capture tiny particulate matter, such as dust, metal fragments, etc. These particulate matter can cause malfunctions such as arcing and insulation breakdown. The heating system can heat the transformer oil to the appropriate temperature to promote its fluidity and enhance the dehumidification effect. The control system monitors and regulates parameters such as temperature, flow and pressure throughout the process.
Secondly, the reuse of transformer oil requires a series of steps: pretreatment, filtration and regeneration. During the pretreatment phase, the old transformer oil is drained and initially cleaned to remove large particle contaminants. Then, a continuous circulation filtration operation is performed in the oil filter machine to separate the residual impurities from the transformer oil and keep it in good condition. Finally, in the regeneration stage, the waste transformer oil that has reached a certain degree of pollution but still has potential value is deeply processed and reused.
In addition, it is also very important to select the filter element or membrane of the appropriate model and size. Different types and levels of filter media (such as cardboard type, mesh type) can effectively remove tiny particulate matter in different size ranges; and high-quality materials with high temperature resistance and long service life can ensure stable operation of the equipment and reduce Replacement frequency and cost.
In short, the "transformer oil reusable oil filter" is a high-efficiency and environmentally friendly equipment. It has significant advantages in improving the efficiency of the transformer test bench and reducing maintenance costs. This equipment can not only clean the waste in the transformer test bench that lacks insulation performance or contains debris that reaches the lower limit of the standard, but can also clean the waste that has reached the upper limit of the standard or is close to the upper limit of the standard (such as the moisture content reaches 0.5%). Regeneration, and finally obtain fresh Chirun that meets the requirements of national standards and user needs.
