When installing a transformer oil filter on site, it is very important to prevent the transformer from getting wet. The treatment process of transformer oil is closely related to preventing the transformer from getting wet. Transformer installation quality is good, no moisture.
According to the transformer oil filter manufacturer's information, the construction site is well planned and equipped with high vacuum oil filter, flat oil filter, oil filter paper, vacuum pump, vacuum pump oil, mercury vacuum gauge, pointer vacuum gauge, pointer pressure Instruments, oil testers, oil pipes, valves, oil storage tanks reinforced PVC plastic hoses can be used for transformer oil pipelines and vacuum pipelines. In order to improve the quality of the oil filter, the oil storage tank should be equipped with a moisture absorber.
If the remaining oil level of the oil filter and the oil reservoir is different from the new oil level, the oil filter and the remaining oil in the reservoir must be removed and stored separately. Clean the inside of the oil storage tank to keep
Keep the seal of the oil storage tank clean, check whether the color of the moisture absorber inside the installed moisture absorber is normal, and whether the oil level of the oil seal is normal.
The technical features of the compressor oil purifier:
1. Two-stage high vacuum, high pumping speed, and advanced dehydration and degassing three-dimensional flash evaporation technology can quickly and effectively remove moisture, impurities, hydrocarbons and other harmful components in the oil.
2. Efficiently improve the flash point and compressive strength of insulating oil.
3. It can satisfy the vacuuming and vacuuming and oiling of the transformer body on the installation or maintenance site.
4. The multi-stage precision filtration is gradually encrypted, which can effectively remove the mechanical impurities in the oil.
